04
Jan
Jan
In some batches of M500, photoelectric limit switches are used on the X and Y axes, and their wiring method is consistent with the original mechanical limit switches.
Category Archives: Hardware
04
Jan
Jan
If an emergency occurs, you can press the emergency stop switch to stop the power supply to the printer mainboard and the printer stops working. Rotate the emergency stop switch in the same direction as the pointer to restore the power supply to the printer mainboard.
04
Jan
Jan
If you want to change the Z-axis limit mode of Eazao Potter to “Z-axis side limit” mode, please follow the steps below to modify it.
07
Oct
Oct
As we all know, in 3D printing, successfully printing the first layer is the key to 3D printing. Whether the first layer can be perfectly printed can be used as a parameter indicator to judge the performance of the printer. Eazao has long been committed to the design and development of ceramic 3D printers, and continuously optimizes the performance and human-computer interaction of ceramic 3D printers. In response to the first layer problem of ceramic printers, two core functions, Babystep and nozzle setter, have been launched.
19
Aug
Aug
This solution is aimed at particularly viscous printing materials, which are particularly hard and cannot be extruded smoothly with a screw extruder.
18
Aug
Aug
If you want to change the Z-axis limit method to the “Z-axis side limit” method, please modify it according to the following procedure.
31
Aug
Aug
Eazao’s concrete 3D printer, by using a pump, can automatically deliver concrete to the extruder of the concrete 3D printer. Below are two different models of pumping machines:
23
Jan
Jan
If you want to increase the thrust of the electric putter, you can do so by replacing the motor, driver and power supply of the electric putter.
28
Nov
Nov
Common faults of Eazao Zero electric putter, such as the motor does not rotate and the motor makes abnormal noise, and the cause and solution of the fault are given.
23
Aug
Aug
Due to transportation and other issues, the Y-axis timing belt of Eazao Zero will fall off. This tutorial provides a repair guide.
- 1
- 2