Embedded within the initialization start_gcode are the multi-axis blending commands M163. S0 P1 governs the primary screw extruder factor, and S1 P0.56 defines the volumetric flow ratio of the linear actuator pusher. The screw extruder parameter P under channel S0 is configured as a baseline static constant of 1 and remains unaltered.
Category Archives: Software
Regarding the issue of Clay Slicer 3 not working on Eazao Potter, we offer the following suggestions:
In ceramic 3D printing, moiré patterns, often referred to by users as ghosting or pulsating patterns, are an extremely common yet easily misdiagnosed problem. Many users immediately suspect mechanical vibration, loose belts, stepper motor accuracy, or even insufficient machine rigidity.
You only need to update the End G-code to completely solve the problem.
If your ceramic 3D printer fails, you need to update the printer firmware and screen to solve the problem. You can refer to the following tutorial.
Spiralize would start at “full flow” even though the layer height was only a fraction of a full layer height. That caused a ridge as the first spiral layer would be over-extruded.
Ceramic 3D printing stands at the forefront of technological innovation, merging age-old ceramic craftsmanship with modern digital fabrication techniques. This fusion offers unprecedented possibilities in various fields, from aerospace to bespoke artistry. The significance of ceramic 3D printing lies in its ability to transform traditional manufacturing processes, enabling customization and complexity that were previously unattainable.
Let printed model display on the screen: MKS Wifi Plugin
If you want to make more creative shapes, you need to do model design and model slicing.
Eazao ceramic 3D printer slicing software tutorial, which introduces the setting parameters of Eazao Zero ceramic 3D printing in Cura in detail.
- 1
- 2










