20
Jan
Jan
You only need to update the End G-code to completely solve the problem.
Category Archives: Technology
04
Jan
Jan
In some batches of M500, photoelectric limit switches are used on the X and Y axes, and their wiring method is consistent with the original mechanical limit switches.
04
Jan
Jan
If an emergency occurs, you can press the emergency stop switch to stop the power supply to the printer mainboard and the printer stops working. Rotate the emergency stop switch in the same direction as the pointer to restore the power supply to the printer mainboard.
04
Jan
Jan
If you want to change the Z-axis limit mode of Eazao Potter to “Z-axis side limit” mode, please follow the steps below to modify it.
Software, Technology, Tutorial
Tutorial on updating the firmware and screen firmware of ceramic 3D printers
10
Dec
Dec
If your ceramic 3D printer fails, you need to update the printer firmware and screen to solve the problem. You can refer to the following tutorial.
18
Aug
Aug
If you want to change the Z-axis limit method to the “Z-axis side limit” method, please modify it according to the following procedure.
02
Jul
Jul
The layer thickness of Eazao Zero can be set to 0.4-1mm, and the nozzle supports 0.6-3mm.