If you want to increase the thrust of the electric putter, you can do so by replacing the motor, driver and power supply of the electric putter.
Category Archives: Tutorial
This article explains common problems such as the complete machine, electric putter, extruder, precautions, etc.
Equipment maintenance is a very important part of the use of ceramic 3D printers. After printing, be sure to maintain the cartridge, feeding
tube and extruder, otherwise the mud will be solidified and hardened inside, which will affect the next use.
Common faults of Eazao Zero electric putter, such as the motor does not rotate and the motor makes abnormal noise, and the cause and solution of the fault are given.
For the Ceramic 3D Printer Kit | Eazao Kit, it is suitable for the firmware update of the Ender3 series printers, and the solution for the parameters in the EEPROM after the firmware update has not changed.
Upgrade your FDM 3D printer to a ceramic 3D printer using this kit. This kit is suitable for all FDM open source 3D printers.
Eazao ceramic 3D printer slicing software tutorial, which introduces the setting parameters of Eazao Zero ceramic 3D printing in Cura in detail.
Although we are currently only upgrading for Ender 3, other FDM printers are also possible. For the modification of the firmware part, please refer to the following process, and upload it to the printer after modification. You need to design the fixed mechanical part of the extruder yourself.
A summary of common problems with Cura settings, such as not modifying the temperature.
Upgrade your FDM 3D printer to a ceramic 3D printer using this kit. This kit is suitable for all FDM open source 3D printers.