Eazao Zero Direct Extrusion-500cc

This solution is aimed at particularly viscous printing materials, which are particularly hard and cannot be extruded smoothly with a screw extruder.

Preparation: directly extrude the adapter plate, PCF10-02.

  1. Remove the 2 M6 bolts and take off the SHF20 that fixes the extruder.

  1. Fix the direct extrusion adapter plate to the X-axis slider and fix the PCF10 on the adapter plate as shown in the figure below.

  1. Insert the material tube directly into PCF10.

Leave a Reply

Your email address will not be published. Required fields are marked *