This solution is aimed at particularly viscous printing materials, which are particularly hard and cannot be extruded smoothly with a screw extruder.
Tag Archives: hardware
If you want to change the Z-axis limit method to the “Z-axis side limit” method, please modify it according to the following procedure.
Eazao’s concrete 3D printer, by using a pump, can automatically deliver concrete to the extruder of the concrete 3D printer. Below are two different models of pumping machines:
If you want to increase the thrust of the electric putter, you can do so by replacing the motor, driver and power supply of the electric putter.
Common faults of Eazao Zero electric putter, such as the motor does not rotate and the motor makes abnormal noise, and the cause and solution of the fault are given.
Due to transportation and other issues, the Y-axis timing belt of Eazao Zero will fall off. This tutorial provides a repair guide.
This solution is aimed at particularly viscous printing materials, which are particularly hard and cannot be extruded smoothly with a screw extruder.