Eazao Bio 3

Eazao Bio 3 can achieve non-continuous path printing through the built-in Air control box insert insert.

 

 

Eazao Bio is equipped with a standard barrel of 30ml, only 5ml of material is needed for experimentation, and it is compatible with standard nozzles of various types (0.1-1.5mm). Eazao Bio is widely used in micro-viscosity fluid 3D printing experiments.

Eazao Bio has no restrictions on printing materials. We and our partners have successfully tested: HA, BCP and other bioceramics, ZrO2, SiC, Al2O3 and other special ceramics, silicone rubber, hydrogels and other viscous fluids. We do not provide material formulas, but after you purchase, we can provide some technical support to help you complete scientific research experiments.

The material printed by Eazao Bio is a viscous fluid. Due to the rheological properties of the viscous fluid, it has the properties of plasticity, swelling, and shear thinning. In the industry, the printing accuracy generally refers to the nozzle diameter. Eazao Zero is compatible with standard nozzles, which can be as small as 0.1mm or even smaller. However, a smaller nozzle requires a smaller particle size of your material, and the fluidity of the material you prepare yourself is good enough, otherwise it will break easily, and you need to use a ball mill or other means to process the material. You can see here for details: Ceramic 3D Printing Accuracy

 

 

Eazao has been deeply involved in the field of viscous fluids for many years, and has rich experience in software and hardware development of viscous fluids. If you have other requirements for the equipment, you can contact: hello@eazao.com, we can customize the extrusion module for you. (Add temperature control, ultraviolet light and other systems)

 

 

Eazao Bio 3 is equipped with a precision pressure regulating valve, which can precisely adjust the output air pressure within the range of 0-1MPa.