|Print Technology||DIW (Direct Ink Writing)|
|Build Volume||150 x 150 x 240 mm (Width x Depth x Height)|
|Layer Resolution||0.2 -1mm|
|Extrusion Feeding Method||Precision pneumatic extrusion|
|Print Speed||10mm/s - 40mm/s|
|Supported Print Materials||Suitable for a variety of viscous fluids: ZrO2, SiC,HA, etc.|
|Operating systems||Windows, Mac, Linux|
|Slicer Software||Cura, SLic3r, Simplify3D etc|
|Input Formats||.STL, .OBJ etc|
|Connectivity||Full color touch screen, SD Card, USB|
|Rated voltage||AC 100-240V~50/60Hz|
|Input Rating||DC 12V, 10A|
|Printer Frame Dimensions||350 x 300 x 500 mm(Width x Depth x Height)|
|1 x Eazao Bio 3D Printer||*1 x Air Control Box (Optional)||1 x Nozzle|
|1 x Pressure Regulating valve||1 x Hex Key Set||1 x 30ml Cartridge|
|1 x Power Adapter||1 x Tube||1 x 2GB SD Card|
|1 x USB Cable||1 x Instruction Manual（Not shown）||1 x Getting Started Guide（Not shown）|
*The optional part needs to be ordered separately according to your needs and is not in the equipment.
The standard version of Eazao Bio is direct extrusion with air pressure, and the material extrusion is not controlled, that is, the path must be continuous. For this reason, we have launched the Air control box, which can realize non-continuous path printing:Air control box.
Eazao Bio is a machine for 3D printing of viscous fluids in laboratories.
About the micro experiment:
Eazao Bio is equipped with a standard barrel of 30ml, only 5ml of material is needed for experimentation, and it is compatible with standard nozzles of various types (0.1-1.5mm). Eazao Bio is widely used in micro-viscosity fluid 3D printing experiments.
About printing materials:
Eazao Bio has no restrictions on printing materials. We and our partners have successfully tested: HA, BCP and other bioceramics, ZrO2, SiC, Al2O3 and other special ceramics, silicone rubber, hydrogels and other viscous fluids. We do not provide material formulas, but after you purchase, we can provide some technical support to help you complete scientific research experiments.
About printing accuracy:
The material printed by Eazao Bio is a viscous fluid. Due to the rheological properties of the viscous fluid, it has the properties of plasticity, swelling, and shear thinning. In the industry, the printing accuracy generally refers to the nozzle diameter. Eazao Zero is compatible with standard nozzles, which can be as small as 0.1mm or even smaller. However, a smaller nozzle requires a smaller particle size of your material, and the fluidity of the material you prepare yourself is good enough, otherwise it will break easily, and you need to use a ball mill or other means to process the material. You can see here for details: Ceramic 3D Printing Accuracy
Eazao has been deeply involved in the field of viscous fluids for many years, and has rich experience in software and hardware development of viscous fluids. If you have other requirements for the equipment, you can contact: firstname.lastname@example.org, we can customize the extrusion module for you. (Add temperature control, ultraviolet light and other systems)
About minimum air pressure:
The minimum air pressure of Eazao Bio depends on your material, if it is a common ceramic material, it is around 0.1-0.2Mpa. If you need more air pressure, you just need to increase your air pressure, nothing to do with Eazao Bio.
Eazao Bio is equipped with a precision pressure regulating valve, which can precisely adjust the output air pressure within the range of 0-1MPa.
***You need to provide Eazao Bio with a compressed air supply above 0.6MPa. You can purchase an air compressor or pressure tank that meets the above performance. You can buy it from Amazon or local hardware stores: Air compressors.
Margaux Reynolds (verified owner) –
Amazing! When I first set this up, I was expecting more of a trial and error process in order to operate. I was amazed that it worked the first time and has been very easy to operate. Well worth the money. The air control box is a must!