Eazao CCF (Continuous Clay Feeder) - Image 2

Eazao CCF (Continuous Clay Feeder) - Image 3

Eazao CCF (Continuous Clay Feeder)

Name: Eazao CCF (Continuous Clay Feeder)
SKU: 5828
Price: 7999.00 USD
Availability: InStock

$7,999.00

Frame and cover: 304 Stainless Steel

Working voltage: AC 115/230V~50/60Hz.

Size: 60*35*100 CM (L*W*H).

Weight: 30 KG.

Before placing an order, contact: hello@eazao.com

Category: Feeding System Tag: upgrade kit

Description
Reviews (0)

The above video shows the M700 after being upgraded to CCF feeding, used for printing wall tiles.

General features

Length：60 cm

Width： 35 cm

Height： 100 cm (170 cm with basement)

Approximated weight： 30 kg

Mechanical features

Frame and cover：Stainless steel

Electrical features

Input： AC 115/230V~50/60Hz.

Absorbed power： 360W

Continuous feeding informations

Technology： DIW

Max output： 30 kg/h (measured with earthenware and 8mm nozzle)

Compatible nozzles： 4, 6, 8 mm

Interface：Built-in dual PWM controller

Cartridge capacity: 10L (The lower cone volume is 3L)

Suitable materials：Earthenware, Stoneware, Porcelain, mixtures

CCF control panel:

The upper PWM controller controls the vertical mixer, and the cable of the vertical mixer needs to be plugged into port A at the bottom of the chassis.

The lower controller controls the horizontal extruder, and the cable of the horizontal extruder needs to be plugged into port B at the bottom of the chassis.

PWM Control Panel Introduction

1. Global On/Off: Turn on the red button switch at the bottom of the chassis and the round button control panel switch on the chassis. Remember that when the system is turned on, components will begin to move. This button can be used as an emergency button.

2. ON/OFF Mixer: The mixer is automatically turned on with the global green button. You can use this button to manually switch on and off the movement of the mixing unit.

3. ON/OFF Extruder: The extruder is automatically turned on with the global green button in case the machine is not connected by cable to the 3D printer. You can use this button to manually switch on and off the movement of the mixing unit.

4. FREQUENCY MIXER: Adjust the frequency of movement of the mixing unit. Reasonable values between 1.000 and 15.000

5. FREQUENCY EXTRUDER: Adjust the frequency of movement of the mixing unit. Reasonable values between 1.000 and 15.000

6. DUTY MIXER: Do not modify this value if you are not instructed to do so. By deafult is 50%. Reasonable values between 20 and 50.

7. DUTY EXTRUDER: Do not modify this value if you are not instructed to do so. By deafult is 50%. Reasonable values between 20 and 50.